Woodway DESMO '05 Owner's Manual download pdf (Page 24)

FORM: OWNERS MNUL

REV: 02-16-11

APPR BY: MF

Grounding Requirements

This treadmill must be grounded. If it should malfunction or break down, grounding

provides a path of least resistance for electric current to reduce the risk of electric

shock. This product is equipped with a power cord with a grounding plug. The plug must

be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Location Requirements

Install your treadmill on a structurally sound surface. If it is to be used above ground

level set it up near the corner of the room to ensure maximum support during high-

speed use. The surface should be reasonably level to ensure minimum frame flexing.

Do not place the treadmill directly on shag or plush carpeting because of the moving

parts underneath. If the operating area is thickly carpeted, set the unit on a mat

(WOODWAY has a selection of mats available for purchase if needed; call 1-800-

WOODWAY for details). This will reduce the lint that can get into the treadmill and also

reduce carpet wear.

Transporting Your Treadmill

CAUTION: THIS TREADMILL IS HEAVY AND COULD CAUSE INJURY IF PROPER

LIFTING TECHNIQUES ARE NOT UTILIZED. LIFTING BARS ARE SUPPLIED WITH

THE TREADMILL TO MOVE THE TREADMILL.

ATTENTION: Ce tapis roulant est lourd et POURRAIT PROVOQUER DES

BLESSURES SI bonnes techniques de levage sont pas utilisés. BAR LEVAGE

sont fournis avec le tapis roulant pour MOVE le tapis roulant.

Lifting bars are inserted into each bottom corner of the treadmill. Do not pull or lift on the

cosmetic covers. If a flat dolly is available, place the dolly underneath the treadmill and

push it to the desired location. If the treadmill must be disassembled, the cosmetic

covers and the handrail assembly could be removed for easier transportation. Always

unplug your treadmill before disassembly.

Electrical Requirements

Desmo, Path, Mercury:

120vac, 50/60hz, 15amps

230vac, 50/60hz, 10amps

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 78 79

No comments

Woodway DESMO '05 Owner's Manual Page 24