Woodway EcoMill Non-Motorized Owner's Manual download pdf (Page 13)

FORM: EM OWNERS MNUL

REV: 6/4/10

APPR BY: MF

Power Requirements

The EcoMill is non-motorized and therefore does not require electricity from a wall

outlet. The EcoMill display is powered up by the user moving the belt.

The display utilizes a battery back-up to assure uninterrupted use and will remain

constant on for two minutes after the belt is initially moved.

**The EcoMill has a power switch located on the lower middle of the running deck. This

power switch enables the battery back-up system and must be switched to the on

position.

Running Belt Specifications

General Slats, overlapping, replaceable

Slat type Rubber over aluminum support

Running Belt Hardness Approximately 40 Shore A

Running Area See detailed specifications/model (Ch.1)

Standard Color Black

Support 114 roller bearings, 12 roller guides

Lateral movement +/- 8 mm

Environmental Specifications

Degree of Protection IP2x

Operating Conditions

Ambient Temperature +10°C to +40°C (0°F to +104°F)

Relative Humidity 20 to 95%

Transportation & Storage Conditions

Temperature Range -18°C to +49°C (0°F to +120°F)

Relative Humidity 20 to 95%

Atmospheric Pressure Range 700hPa to 1060 hPa (20.67 to 31.3

inches of Mercury)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 34 35

No comments

Woodway EcoMill Non-Motorized Owner's Manual Page 13